FGR4S V2 Receiver: Single-Antenna Bidirectional Output for RC Car Boat

To ensure a strong signal, make sure the receiver antenna is far away from any metal parts during installation. Follow the steps below to bind the receiver:

1. Plug the binding cable into the BIND port on the receiver.
2. Connect the power cable to any other port, and the receiver's LED will flash quickly to indicate it is in bind mode.
3. Put the transmitter into bind mode (refer to the transmitter's manual for instructions).
4. Successful binding is indicated by the receiver's LED flashing slowly. Remove the power and bind cables from the receiver (if the transmitter is bidirectional, the receiver status indicator will not flash slowly).
5. Reconnect the power cable to the receiver.
6. Test the transmitter and receiver to ensure they are functioning correctly. If there are any issues, repeat the binding process.

Specifications: - Wireless frequency: 2.4GHz - Wireless protocol: AFHDS 3 - Mode type: RC Car / Boat - Range: >200m (ground) - Antenna type: Built-in single antenna - Power: 3.5-8.4V - RSSI: Supported - Data port: PWM / PPM / i.bus - Dimensions: 26 * 22 * 17.3 mm

The FS-GR3E Receiver and FS-BS6 Receiver are also available for purchase. The FS-GR3E is a 3-channel receiver with dimensions of 37.6 * 22.3 * 13mm, while the FS-BS6 is a 6-channel receiver with dimensions of 29 * 22 * 16mm. Customers have rated the FGR4S V2 4 Channels Receiver 4.1 out of 5 stars, praising its performance and ease of use.

Get your FGr4S V2 4 Channels Receiver today for $8.99 and enjoy seamless connectivity with your RC car or boat when used with the Noble FS-NB4 PL18 Transmitter.

product information: