Flysky INr4 Gyro Receiver 4 Channels for NB4, NB4+, Noble Lite, Noble Pro Radio Transmitter AFHDS 3

Product Description This product is designed for compatibility with the NB4 2.0.93 and NB4 Lite 1.0.10 and later versions. The firmware utilizes version 3.0 of the high-frequency library. Users are advised to check the Firmware Version on their noble transmitter before use.

Binding Receiver & Force Update 1. To bind the receiver, press and hold the BIND button [5] while powering on the receiver. Release the BIND button after the receiver is powered on or press and hold the BIND button for 3 seconds after powering on the receiver. The LED [7] on the receiver will flash rapidly. 2. Put the transmitter into bind mode. 3. The binding process is complete when the LED on the receiver stops flashing and remains on continuously. - If a transmitter set to “AFHDS3 1 way” enters bind mode, the receiver LED will flash slowly. Exiting bind mode on the transmitter will complete the binding process. 4. Ensure proper functionality of the transmitter and receiver. Repeat steps 1 to 3 if any issues arise. If after a firmware update, the transmitter fails to bind to the receiver, the receiver may require a forced update. 1. Power on the receiver while pressing the BIND button [5] for approximately ten seconds until the LED [7] flashes three times. Or power on the receiver first, press and hold the BIND button for 10 seconds until the LED [7] flashes three times, then release the BIND button. 2. Access the RX Setup menu on the transmitter and select “RX Update”. 3. A successful update is indicated by a slow flashing receiver LED.

Flysky Gyro Receiver INr4-GYB for Noble NB4, Noble Pro, Noble Lite Radio Transmitter The Flysky Gyro Receiver INr4-GYB is compatible with all AFHDS3 surface transmitters (such as NB4, NB4 Lite, etc.). It features Flysky's third-generation automatic frequency hopping digital system and supports PWM/PPM/i-bus/S.BUS/i-bus2 signals.

Model Type: Car/Boat PWM Channels: 4 RF: 2.4GHz ISM Antenna: Single Antenna Input Power: 3.5~9V Data Output: PWM/PPM/i-bus/S.BUS/i-bus2 Online Update: Yes Dimensions: 172916.6mm Weight: 6.5g Certification: CE, FCC ID: N4ZINR4GYB0

Flysky INr4-GYB Gyro Receiver Failsafe Setup for Noble NB4, Noble Pro, Noble Lite Radio Controllers The receiver supports three failsafe modes: "Free", "Hold", and "Fixed value". Each mode adjusts the response of the channels when the receiver loses signal.

SVC Setting (NB4 interface) The SVC function utilizes the gyroscope to enhance the vehicle's driving state. Users can customize the deviation correction settings to improve performance.

Flysky INr4-GYB Gyro Receiver AFHDS3 for Flysky Noble NB4, Noble Pro Transmitter, Noble Lite Data Output: PWM/PPM/i-bus/S.BUS/i-bus2 Input Power: 3.5~9V Dimensions: 172916.6mm Weight: 6.5 Grams

Customers can choose from various models and channels to suit their specific needs. The product range includes Gyro Receiver INr4-GYB, FGr8B Receiver, FGr4S Receiver, FGr4P Receiver, and FGr4 Receiver. Each model offers unique features to enhance the user experience.

product information: